Air filter

Based on the AIR Vintage Filter plugin

The Vintage Filter plug-in provides a variety of controls for adjusting plug-in parameters.

Cutoff
The Cutoff control lets you adjust the Cutoff frequency (20.0 Hz to 20.0 kHz) of the filter.

Resonance
The Resonance control lets you adjust the amount filter Resonance (0–100%). The filter can go
into self-oscillation at high values creating a sine wave-like overtone at the Cutoff frequency.

Fat
The Fat control lets you adjust the amount of overdrive in the resonant peak. At lower settings
the signal gets quieter at high Resonance settings for clean distortion. At higher settings the
signal is over-driven at high resonance settings.

Mode
Select one of the following options for the type of filter:
• LP24: Provides a low pass filter with a 24 dB cutoff.
• LP18: Provides a low pass filter with a 18 dB cutoff.
• LP12: Provides a low pass filter with a 12 dB cutoff.
• BP: Provides a band pass filter.
• HP: Provides a high pass filter.

OutputThe Output control lets you lower the Output level from 0.0 dB to –INF dB.